Radio Shack TV ANTENNA Bedienungshandbuch PDF herunterladen (Seite 2)

2

2. If your TV (or FM receiver) has an F-con-

nector:

a. Connect one end of the supplied

coaxial cable to your TV (or FM

receiver).

b. Connect the other end of the cable to

the antenna’s

TO TV

jack.

If your TV set (or FM receiver) does not

have an F-connector:

a. Connect one end of the supplied

coaxial cable to the F-connector in a

transformer/splitter (not supplied).

b. Connect the other end of the cable to

the antenna’s

TO TV

jack.

c. Connect the transformer/splitter’s

brown 300-ohm twinlead to your TV’s

(or FM receiver’s) VHF terminal

screws.

d. Connect the transformer/splitter’s

gold 300-ohm twinlead to your TV’s

(or FM receiver’s) UHF terminal

screws.

Cautions:

You must use a Class 2 power

source that supplies 12V DC

and delivers at least 100 mA.

Its center tip must be set to positive and

its plug must fit the antenna's

12VDC

100MA

jack. The supplied adapter meets

these specifications. Using an adapter

that does not meet these specifications

could damage the antenna or the

adapter.

• Always connect the AC adapter to the

antenna before you connect it to AC

power. When you finish, disconnect the

adapter from AC power before you dis-

connect it from the antenna.

3. Insert the supplied AC adapter’s small

barrel plug into the

12VDC 100mA

jack on

the back of the antenna’s base.

4. Plug the AC adapter into a standard AC

outlet.

TV

TO TV

TV

TO TV

!

12VDC

100mA Jack

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare