2
Follow these steps to connect the components to the selector.
1. Connect each component’s sound outputs to a set of
INPUT
(
1
–
5
)
R
/
L
jacks on the back of the selector or
INPUT 6 R
/
L
jacks on the
front of the selector.
2.
If a component does not have an S-video cable
, connect its video
output to the appropriate
INPUT
(
1
–
5
)
V
on the back of the selector
(or
INPUT 6 V
on the front of the selector) for that component.
If the component has an S-video cable
, connect it to the S-video
INPUT
(
1
–
6
)
S-VIDEO
jack for that component.
Caution:
Do not connect a component’s video output to both
INPUT
(
1
–
5
)
V
(or
INPUT 6 V
) and
INPUT
(
1
–
6
)
S-VIDEO
.
3.
If the TV or monitor you want to connect does not have an S-video
cable
, connect its video input to
OUTPUT
(
1
–
2
)
V
.
If it has an S-video cable
, connect it to
OUTPUT
(
1
–
2
)
S-VIDEO
.
Caution:
Do not connect the TV’s or monitor’s video input to both
OUTPUT
(
1
–
2
)
V
and
OUTPUT
(
1
–
2
)
S-VIDEO
.
4. Connect the TV or monitor inputs to
OUTPUT
(
1
–
2
)
R
/
L
.
5. Using fiber-optic cable, connect the optical output of your audio
equipment to
INPUT
(
1
–
6
)
OPTICAL
. Connect the optical input to
OUTPUT
(
1
–
2
)
OPTICAL
.
6. Connect the supplied AC adapter’s barrel plug to the selector’s
DC 9V IN
jack, then connect the adapter’s AC plug to a standard
AC outlet.
Cautions:
You must use a Class 2 power source that supplies 9V
DC and delivers at least 500 mA. Its center tip must be
set to positive and its plug must fit the selector's
DC 9V
IN
jack. The supplied adapter meets these specifications. Using
an adapter that does not meet these specifications could damage
the selector or the adapter.
• Always connect the AC adapter to the selector before you connect
it to AC power. When you finish, disconnect the adapter from AC
power before you disconnect it from the selector.
USING THE LEARNING FUNCTION
Your selector can learn signals from up to six different audio and video
components’ remote controls. It uses the latest integrated circuit re-
cording technology to retain the learned information even if AC power
fails.
Notes:
• If you do not complete each step within 10 seconds, the selector
returns to the normal function and you must start again at Step 1.
• Be sure the selector’s learning set up does not affect the setup of
other existing equipment.
Follow these steps to use the learning function.
1. Press
POWER
. The POWER indicator lights.
2. Hold down
LEARN
for about 4 seconds, then release. The LEARN
indicator flashes.
!
(12 Seiten)
(68 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern