Radio Shack 8-IN-ONE REMOTE Spezifikationen PDF herunterladen (Seite 22)

NOTE: Default values for device, its code, and time are shown above.Your remote control

settings may be different.

NOTE: If you wish to exit the programming mode at any time, press EXIT once. An

[EXIT] message appears as the remote control returns to normal operation.

NOTE:Ifan [INVALID] message appears, you have inadvertently pressed an incorrect

key. Simply note your error and continue programming.

2. Press ▼ four times until [VOL LOCK] appears.

NOTE:Ifyou go past [VOL LOCK],press ▲ one or more times to return to it.

3. Press SELECT once to begin programming. [TO MODE] appears.

4. Press a mode key (e.g.,

AUDIO) to lock a device’s volume controls to all modes.

[SUCCESS] and then [EXIT SETUP] appear as the remote control automatically

exits the programming mode and returns to normal operation.

5. If desired, repeat steps 1 through 4 as needed to lock volume controls for other

devices to all modes.

PROGRAMMING VOLUME UNLOCK

1. On the remote,press and hold P until the display changes from the default

device and time to

[CODE SET].

2. Press ▼ five times until [VOL UNLOCK] appears.

NOTE:Ifyou go past [VOL UNLOCK],press ▲ one or more times to return to it.

3. Press SELECT once to begin programming. [ALL MODE] appears.

To unlock one mode, skip to step 4.Otherwise press SELECT once to unlock

all modes.

[UNLOCKED] and then [EXIT SETUP] appear as the remote

automatically exits the programming mode and returns to normal operation.

continued on next page...

Changing Volume Lock 23

USER’S GUIDE

(x 5)

(x 4)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 89 90

Keine Kommentare

Radio Shack 8-IN-ONE REMOTE Spezifikationen Seite 22