Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE Betriebsanweisung Seite 11

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 37
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 10
11
1. Press and hold the Macro key for 3 secs. The LED turns ON
when the key is pressed but turns OFF after 3 secs
indicating that the key can be released.
2. Release the Macro key, LED turns back ON.
3. Press and release the EXIT key, the LED will flash once and
then remain on.
4. Press and Release the Macro Digit key (numeric keys 1-6)
from which you want to delete the Macro command.
The LED will flash once and then remain on.
5. Press and release the OK key to confirm the Macro deletion.
The LED will flash slowly 4 times and turn off.
6. Repeat steps 1-5 to delete other existing macros.
6. Favourite Channel function
This function allows you to pre-program favourite channels
into one button. For example, if your favourite channels are
5, 21, 53 and 102, you can program these into the program
and scroll between only these channels.
This function is supported only in TV, SAT and CABLE
modes. You can not use it for other devices. (It is also
supported in AUX mode if Aux is assigned to TV or SAT or
CABLE)
6.1 Program Favourite Channels
1. Press and hold the FAV. CH key for 3 secs. The LED turns
ON when the key is pressed but turns OFF after 3 secs
indicating that the key can be released.
2. Release FAV.CH key, LED turns back ON
3. Following the exact same sequence when you use your
original remote control, enter the channel number you want
to store in the RC050. The maximum number of digits in
the channel number is 6. The LED turns off each time a key
is pressed and turns on after release. If keys other than
Exit, FAV.CH, numeric keys, Enter or “-/--“ keys are pressed,
they are ignored and the LED will flash rapidly 4 times and
remain on until a valid key is pressed. The Channel will be
automatically saved after you press the sixth key OR…
4. Press and release FAV.CH key. The LED slowly flashes 4
times and remains on to indicate it is ready to let you enter
the next channel.
5. Repeat the steps 3 to 4 for another channel selection.
6. Press the EXIT key to exit the Favourite channel program
mode. The LED will then flash fast 4 times and turn off to
indicate the setup has been completed.
Note:
The max. number of channels you can program is 15, if you
attempt to program more they will overwrite earlier
favourites already entered.
If you start to program a new set of favourite channels, the
previously stored list will be over written.
If no keys are pressed for more than 15 secs, the LED will
flash rapidly 4 times and turn off. The Favourite channel
enter mode will be exited.
Seitenansicht 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare