Radio-shack 21-1703 A Bedienungsanleitung

Thank you for purchasing your Mini Mobile CB Radio from RadioShack.Please read this user’s guide before installing, setting up and using your new prod

10OperationOperational HintsCommon Uses for CB Radios• Warn of traffic tie-ups ahead.• Help truck drivers and delivery personnel learn road and traffic

11OperationThis table lists codes adopted by the Associated Public Safety Communications Officers (APCO)Code Meaning10-1 Your signal is bad.10-2 Your s

12Additional InformationTroubleshootingIf your CB is not working as it should, follow these suggestions to see if you can eliminate the problem. If yo

13Additional Information• Make all CB power and antenna wires as short as possible.• Route the power wires away from the antenna wires.• Be sure that

14Additional InformationSpecificationsReceiverFrequency coverage ... all 40 CB channels (class D) 26.965 - 27.405 MHzSensitivity for 10 dB

15Additional InformationRF EmissionsWARNING! The Federal Communications Commission has adopted a safety standard for human exposure to radio frequency

21-1703 AP/N: AO0309AAA106A08Printed in China©2008. RadioShack Corporation.All rights reserved. RadioShack and RadioShack.comare trademarks used by Ra

2ContentsProduct Features... 3Setup...

3Product FeaturesOther FeaturesFull Legal Power – gives you the greatest available range.Automatic Noise Limiter – reduces impulse-type noises while r

4SetupSetupAttaching the Microphone HolderYou can attach the microphone holder to either side of the transceiver or to another location in your vehicl

5SetupMounting the TransceiverCautions:• If you use this CB in a vehicle, mount it securely to avoid damage to the CB or vehicle, or injury to anyone

6SetupConnecting an AntennaThere are many different types of CB radio antennas for mobile CBs. Each type has its own benefits, so choose the one that b

7SetupConnecting the Microphone1. Press the tab on the side of the supplied microphone’s plug and insert the plug into the MIC jack on the front of th

8SetupUsing Vehicle Battery PowerTo connect the transceiver to the vehicle battery power:1. Connect the red wire (with the inline fuse holder) on the

9OperationOperationReceiving Transmissions and Adjusting SQUELCH1. Rotate SQUELCH fully counterclockwise.2. Rotate VOLUME clockwise until it clicks to